How To Move A Pinball Machine
How To Move A Pinball Machine. They will wrap it in blankets. Lower the rear of the cabinet to the floor and then stand the pinball up on end so the coin door is facing up.
Then, fold the head down if it’s a newer machine, or remove it if you have a machine that allows you to do so. You can also use straps, a dolly, or take the machine apart and carry it up you can also use straps, a dolly, or take the machine apart and carry it up Those bolts run through the machine to the.
You Can Move It Yourself, Just Make Sure That If There Are Doorways At The Bottom Of The Stairs That The Pin Will Fit Through Without Removing The Door Before You Start Down The Stairs.
If you can put them in a small box and tape them (or wrap them) to the machine, this will ensure that you don’t lose them. Lift up the front so the coin door is facing up in the air. Taking it apart in pieces is not very hard or complicated.
Other Side Of The Room), An Easy Way Is To Crouch Under The Pin And Lift It With Your Back.
Unwrap all the pieces and lay them out on the ground. Before moving the machine, open the coin door to unlatch the lockdown bar and remove it (this is the metal bar that. You can also use straps, a dolly, or take the machine apart and carry it up you can also use straps, a dolly, or take the machine apart and carry it up
Now Lift The Back Of The Game And Push At The Same Time And The Game Should Slide Right In.
Only then can they remove the front legs of the machine. Remove the pinballs and any other easily removable components. Place the pinball on a hand truck to move it.
Don't Lift It Too High Though So It Won't Tip Over To One Side.
If you look inside at the corners, you will see two bolts in each corner. Secure the head and play field with plastic wrap. Then, fold the head down if it’s a newer machine, or remove it if you have a machine that allows you to do so.
First, You Should Remove The Balls From The Machine And Tidy Up Any Loose Components Or Cables.
Be sure to save the bolts, nuts and other small parts necessary to put the pinball machine back together at the new location. If you are wondering how to move a pinball machine, it is best to remove the pinballs from the game and store them safely. Slide in a sheet of some solid material to spread the machine’s weight over as much of its side panels as you can.
Post a Comment for "How To Move A Pinball Machine"