Hot Dog Machine Instructions
Hot Dog Machine Instructions. Cleaning instructions • to clean the glenray hotdog machine, use hot soapy water, remove shaft and wash, then thoroughly wipe down interior and exterior of machine to remove any grease. The unit is designed with 2 seperate cooking zones.
After the buns warm as desired, serve the hot dogs and buns. To warm the hot dogs turn on the warm switch only. The use of extension cords is not
Left Knob Controls The Heat Of One Set Of (5) Rollers And The Right Controls The Other Set Of (5) Rollers.
• check all switches to be sure machine is on. With the heat control set on *hi* and using average sized hot dogs, it will take. Lower the thermostat to the 3 or 4 setting, open the door, add your hot dog buns to the bun warmer and close the door.
Firmly Grasp Plug And Remove From Outlet.
Never leave unit unattended while in use. Drain the water from the drain pipe. To cook the hot dogs turn on the warm and cook switches.
The First Switch Is To Keep The Hot Dogs Warm.
Do not unplug the machine by pulling or tugging on the power cord. Operate your warmer only under sanitary condition (see sanitation instructions). Remove all baskets and partitions from the interior of the machine.
Hotdog Machine Should Only Be Used On A Flat, Stable Work Surface Always Ensure That This Machine Is Plugged Into A Grounded Outlet With The Proper Power Supply Available.
One knob will control the front half (set of 5 rollers) Place hot dogs on rollers. Place the hot dogs in the small compartment and the buns in wire rack in the large compartment.
Place The Hot Dogs In The Carousel.
20 hotdog roller grill owners manual. Watch the dogs carefully the first several times you cook to avoid blistering or burning the hot dogs. Turn heat to designated temperature.
Post a Comment for "Hot Dog Machine Instructions"